Blocks - DSK control pendants

Overview

DSK control pendants

For direct control of drives up to 5.5 kW , Convenient control

Regardless of whether you need to control hoists from ground level or want to control machinery, wire-connected DSK control pendants are the ideal solution.

Why?

  • High level of safety
  • For direct or contactor control
  • Ergonomic design and operation
  • Can be configured to meet a wide range of specific needs

 

The benefits at a glance

High safety and reliability
  • Mechanical interlocking of the switching elements
  • Movements in opposite directions cannot be simultaneously actuated
Performance to meet application requirements
  • Direct control of drives with motor outputs up to 5.5 kW by using various switching elements
  • Indirect control using contactors in the auxiliary circuit for higher outputs
Convenient operation
  • Fatigue-free operation thanks to the ergonomical housing design
  • Sloping control pendant design permits operators to work in a natural, comfortable posture

Customisable

    • Can be configured to customer specifications (e.g. cable length)

Technical details

DSK series control pendants offer the following outstanding technical details:

  • Permissible ambient temperatures from -25 °C to +70 °C
Control
  • CBDN switching element (emergency stop) with positive opening of the NC contacts
  • Direct control of drives up to 5.5 kW
  • Simultaneous 2-pole switching for direct control
  • Switching elements for direct or contactor control
Housing
  • High-quality thermoplastic housing that is highly resistant to impacts
  • Non-flammable, climate and corrision-proof
  • Highly resistant to fuels, salt water, grease, oils and alkaline solutions
Safety
  • Strain relief by means of special hose with additional protective sleeve, as standard
  • Protective insulation to DIN VDE 0100 Part 410
  • Switching distances and forces to DIN 33401, holding force < 8 N
  • IP 55 enclosure to DIN VDE 0470 as standard in “suspended” operating position
  • IP65 on request
Main current switching elements
Type CBD 1 CBD 2 CBDN
Design Single-stage switching element
2 NO		 Double-stage switching element
2 NO in the 1st stage
2 changeover contacts in the 2nd stage		 Single-stage crane switch
(emergency stop), 3 NC
Rated operating voltage [V] 230 400 500 230 400 500
Rated operating current [A] 20 12 9 Ith 2 25
Utilisation category to
DIN VDE 0660 /
EN 60947 Main current		 AC 3, AC 4 AC 3, AC 4 for breaking capacity up to 5.5 kW
Nominal insulation voltage Ui 500 V~ to DIN VDE 0110, CSA 300 VAC
Control current switching element
Type CBS 1 CBS 2
Design Single-stage switching element
2 NO		 Double-stage switching element
2 NO in the 1st stage
1 sequence-controlled NO in the 2nd stage
Rated operating voltage [V] 230 400 500 230 400 500
Rated operating current [A] 10 6 4.5 10 6 4.5
Utilisation category to
DIN VDE 0660 /
EN 60947 Main current		 AC 15 AC 15
Nominal insulation voltage Ui 500 V~ to DIN VDE 0110, CSA 150 V AC